• en
  • en
  • МЕНЮ:

    STEEL GRADE CONSISTENCY

    Information on the consistency of steel grades for thick and thin sheet metal products according to the harmonized European standards DSTU EN 10025, Part 1-6, which can be used as an alternative to rolled metal products according to GOST standards.

    The table with the filter on the consistency of steel grades includes the following parameters: strength class of rolled steel products, class or grade of steel, reference to the standard and its term of validity, alternative according to EN and DSTU EN, availability in the warehouses of manufacturers.

    It is recommended to use relevant steel grades in designing and manufacturing metal structures.

    Strength class of rolled steel products Class or grade of steel GOST, DSTU, ND Status Alternative according to EN DSTU EN standard Note
    C235 С235 GOST 27772 Canceled since January 1, 2019 S235JR S235J0 S235J2 DSTU EN 10025-2 S235JR is available at SMC warehouses in thicknesses of 2-40 mm. Other thicknesses are available on request from the factories S235J0 and S235J2 are available on request from the factories
    C235 St3kp2 DSTU 2651/GOST 380 DSTU 4484/GOST 535 GOST 14637 Actual S235JR S235J0 S235J2 DSTU EN 10025-2 S235JR is available at SMC warehouses in thicknesses of 2-40 mm. Other thicknesses are available on request from the factories S235J0 and S235J2 are available on request from the factories
    C245 С245 GOST 27772 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S275JR / J0 / J2 according to the DSTU EN 10025-2 standard; S275 N/NL according to DSTU EN 10025-3 standard; S275 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C245 St3ps5 DSTU 2651/GOST 380 DSTU 4484/GOST 535 GOST 14637 Actual There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S275JR / J0 / J2 according to the DSTU EN 10025-2 standard; S275 N/NL according to DSTU EN 10025-3 standard; S275 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C255 С255 GOST 27772 Actual There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S275JR / J0 / J2 according to the DSTU EN 10025-2 standard; S275 N/NL according to DSTU EN 10025-3 standard; S275 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C255 St3sp5 St3Gps5 St3Gps5 DSTU 2651/GOST 380 DSTU 4484/GOST 535 GOST 14637 Actual There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S275JR / J0 / J2 according to the DSTU EN 10025-2 standard; S275 N/NL according to DSTU EN 10025-3 standard; S275 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C275 С275 GOST 27772 Canceled since January 1, 2019 S275JR S275J0 S275J2 DSTU EN 10025-2 Grades are available on request from the factories
    C275 С275 GOST 27772 Canceled since January 1, 2019 S275N S275NL DSTU EN 10025-3 Grades are available on request from the factories
    C275 С275 GOST 27772 Canceled since January 1, 2019 S275M, S275ML DSTU EN 10025-3 Grades are available on request from the factories
    C285 С285 GOST 27772 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S355JR / J0 / J2 according to the DSTU EN 10025-2 standard; S355 N/NL according to DSTU EN 10025-3 standard; S355 M/ML according to DSTU EN 10025-4 standard. S355JR is available at SMC warehouses in thicknesses of 4-6 mm. S355J2 is available at SMC warehouses in thicknesses of 8-100 mm. Other thicknesses and grades are available on request from the factories
    C295 09G2 09G2S GOST 19281 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S355JR / J0 / J2 according to the DSTU EN 10025-2 standard; S355 N/NL according to DSTU EN 10025-3 standard; S355 M/ML according to DSTU EN 10025-4 standard. S355JR is available at SMC warehouses in thicknesses of 4-6 mm. S355J2 is available at SMC warehouses in thicknesses of 8-100 mm. Other thicknesses and grades are available on request from the factories
    C325 09G2S 14G2 15HSND GOST 19281 Canceled since January 1, 2018 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S355JR / J0 / J2 according to the DSTU EN 10025-2 standard; S355 N/NL according to DSTU EN 10025-3 standard; S355 M/ML according to DSTU EN 10025-4 standard. S355JR is available at SMC warehouses in thicknesses of 4-6 mm. S355J2 is available at SMC warehouses in thicknesses of 8-100 mm. Other thicknesses and grades are available on request from the factories
    C345 С345 GOST 27772 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S355JR / J0 / J2 according to the DSTU EN 10025-2 standard; S355 N/NL according to DSTU EN 10025-3 standard; S355 M/ML according to DSTU EN 10025-4 standard. S355JR is available at SMC warehouses in thicknesses of 4-6 mm. S355J2 is available at SMC warehouses in thicknesses of 8-100 mm. Other thicknesses and grades are available on request from the factories
    C345 09G2S 15HSND GOST 19281 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S355JR / J0 / J2 according to the DSTU EN 10025-2 standard; S355 N/NL according to DSTU EN 10025-3 standard; S355 M/ML according to DSTU EN 10025-4 standard. S355JR is available at SMC warehouses in thicknesses of 4-6 mm. S355J2 is available at SMC warehouses in thicknesses of 8-100 mm. Other thicknesses and grades are available on request from the factories
    C345 09G2SYUch TU 14-1-5065-2006 Actual There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S355JR / J0 / J2 according to the DSTU EN 10025-2 standard; S355 N/NL according to DSTU EN 10025-3 standard; S355 M/ML according to DSTU EN 10025-4 standard. S355JR is available at SMC warehouses in thicknesses of 4-6 mm. S355J2 is available at SMC warehouses in thicknesses of 8-100 mm. Other thicknesses and grades are available on request from the factories
    C345K С345К GOST 27772 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S355JR / J0 / J2 according to the DSTU EN 10025-2 standard; S355 N/NL according to DSTU EN 10025-3 standard; S355 M/ML according to DSTU EN 10025-4 standard. S355JR is available at SMC warehouses in thicknesses of 4-6 mm. S355J2 is available at SMC warehouses in thicknesses of 8-100 mm. Other thicknesses and grades are available on request from the factories
    C345K 10HNDP GOST 19281 Canceled since January 1, 2018 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S355JR / J0 / J2 according to the DSTU EN 10025-2 standard; S355 N/NL according to DSTU EN 10025-3 standard; S355 M/ML according to DSTU EN 10025-4 standard. S355JR is available at SMC warehouses in thicknesses of 4-6 mm. S355J2 is available at SMC warehouses in thicknesses of 8-100 mm. Other thicknesses and grades are available on request from the factories
    C355 09G2SYUch TU 14-1-5065-2006 Actual S355J2 S355K2 S355N S355NL S355M S355ML DSTU EN 10025-2 DSTU EN 10025-3 DSTU EN 10025-4 S355J2 is available at SMC warehouses in thicknesses of 8-100 mm. Other thicknesses and grades are available on request from the factories
    C355 06GB-355 06GBD-355 TU U 27.1-05416923-085-2006 Canceled since June 2, 2016 S355J2 S355K2 S355N S355NL S355M S355ML DSTU EN 10025-2 DSTU EN 10025-3 DSTU EN 10025-4 S355J2 is available at SMC warehouses in thicknesses of 8-100 mm. Other thicknesses and grades are available on request from the factories
    C355 06G2BDP TU U 27.1-05416923-078-2005 Canceled since June 2, 2016 S355J2 S355K2 S355N S355NL S355M S355ML DSTU EN 10025-2 DSTU EN 10025-3 DSTU EN 10025-4 S355J2 is available at SMC warehouses in thicknesses of 8-100 mm. Other thicknesses and grades are available on request from the factories
    C375 C375 GOST 27772 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S420 N / NL according to the DSTU EN 10025-3 standard; S420 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C390 C390 GOST 27772 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S420 N / NL according to the DSTU EN 10025-3 standard; S420 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C390 14G2AF 15G2SF 10HSND GOST 19281 Canceled since January 1, 2018 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S420 N / NL according to the DSTU EN 10025-3 standard; S420 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C390 09G2SYUch-U 09HG2SYUch-U TU 14-1-5065-2006 Actual There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S420 N / NL according to the DSTU EN 10025-3 standard; S420 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C390 06GB-390 06GBD-390 TU U 27.1-05416923-085-2006 Canceled since December 31, 2016 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S420 N / NL according to the DSTU EN 10025-3 standard; S420 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C390 06G2BDP TU U 27.1-05416923-078-2005 Canceled since June 2, 2016 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S420 N / NL according to the DSTU EN 10025-3 standard; S420 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C390K С390К GOST 27772 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S420 N / NL according to the DSTU EN 10025-3 standard; S420 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C390K 15G2AFDps (С390К) GOST 19281 Canceled since January 1, 2018 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S420 N / NL according to the DSTU EN 10025-3 standard; S420 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C420 09G2SYUch-U TU 14-1-5065-2006 Actual S420N S420NL S420M S420ML DSTU EN 10025-3 DSTU EN 10025-4 Grades are available on request from the factories
    C440 C440 GOST 27772 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S460 N / NL according to the DSTU EN 10025-3 standard; S460 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C440 09G2SYUch-U 09HG2SYUch-U TU 14-1-5065-2006 Actual There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S460 N / NL according to the DSTU EN 10025-3 standard; S460 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C440 06G2B 06G2BD-440 TU U 27.1-05416923-085-2006 Canceled since December 31, 2016 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S460 N / NL according to the DSTU EN 10025-3 standard; S460 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C440 06G2BDP TU U 27.1-05416923-078-2005 Canceled since June 2, 2016 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S460 N / NL according to the DSTU EN 10025-3 standard; S460 M / ML according to DSTU EN 10025-4 standard. Grades are available on request from the factories
    C460 06G2B TU U 27.1-05416923-085-2006 Canceled since June 2, 2016 S460N S460NL S460M S460ML DSTU EN 10025-3 DSTU EN 10025-4 Grades are available on request from the factories
    C460 09HG2SYUch-U TU 14-1-5065-2006 Actual S460N S460NL S460M S460ML DSTU EN 10025-3 DSTU EN 10025-4 Grades are available on request from the factories
    C490 06G2B 06G2BD-490 TU U 27.1-05416923-085-2006 Canceled since June 2, 2016 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S500Q, S500QL or higher according to DSTU EN 10025-6. Grades are available on request from the factories (currently, the S690Q, S690QL grades are regularly produced in series)
    C490 06G2BDP TU U 27.1-05416923-078-2005 Canceled since June 2, 2016 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S500Q, S500QL or higher according to DSTU EN 10025-6. Grades are available on request from the factories (currently, the S690Q, S690QL grades are regularly produced in series)
    C500 S500Q S500QL DSTU EN 10025-6 Actual S500Q S500QL DSTU EN 10025-6 DBN V.2.6.-198: 2014 does not specify other grades for this class. Grades are available on request from the factories (currently, the S690Q, S690QL grades are regularly produced in series)
    C590 С590 GOST 27772 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S620Q, S620QL or higher according to DSTU EN 10025-6. Grades are available on request from the factories (currently, the S690Q, S690QL grades are regularly produced in series)
    C590 09HG2SYUch-U TU 14-1-5065-2006 Actual There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S620Q, S620QL or higher according to DSTU EN 10025-6. Grades are available on request from the factories (currently, the S690Q, S690QL grades are regularly produced in series)
    C590 12G2SMF TU 14-1-1308-75 The status is unknown, products are not produced There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S620Q, S620QL or higher according to DSTU EN 10025-6. Grades are available on request from the factories (currently, the S690Q, S690QL grades are regularly produced in series)
    C590 12HN2MD TU 14-1-5148-92 The status is unknown, products are not produced There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S620Q, S620QL or higher according to DSTU EN 10025-6. Grades are available on request from the factories (currently, the S690Q, S690QL grades are regularly produced in series)
    C590K С590К GOST 27772 Canceled since January 1, 2019 There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S620Q, S620QL or higher according to DSTU EN 10025-6. Grades are available on request from the factories (now the S690Q, S690QL grades are regularly produced in series)
    C590K 12GN2MFAYU TU 14-1-1772-76 Canceled, cancellation date unknown There is no direct analogue with this strength class (see note) There is no direct analogue with this strength class (see note) It is possible to use steel of the high strength class - S620Q, S620QL or higher according to DSTU EN 10025-6. Grades are available on request from the factories (currently, the S690Q, S690QL grades are regularly produced in series)
    C620 S620Q S620QL DSTU EN 10025-6 Actual S620Q S620QL DSTU EN 10025-6 DBN V.2.6.-198: 2014 does not specify other grades for this class. Grades are available on request from the factories (currently, the S690Q, S690QL grades are regularly produced in series)